Contents

• comand Frequently Used Options
  • —txfreq
  • —txrate
  • —txpwr
  • —txpattern
  • —ani
  • —scrambleroff
  • —shortguard
  • —mode
  • —rx
• All comand TX options
• All comand RX options
• All comand other options

comand Frequently Used Options

—txfreq

• Example

  --txfreq 5180
  --txfreq 36

• Description

  Frequency or Channel to output the waveform (in MHz)

• Parameter

  • 5180,5805,and so on…
  • 40,161,and so on…

—txrate

• Example

  --txrate <rate index> (<0-3> = 1-11Mbps, <4-11> = 6 -54 Mbps, <12-19> = 6.5 -65Mbp, and so on)

• Description

  Date rate to output the waveform

• Parameter

  • Tx Rate Table

—txpwr

• Example

  -txpwr <1-30 dBm)

• Description

Output power ranging from 1 to 30 dBm

• Parameter

Index	Output power
1	1 dBm
15	15 dBm
…	…
30	30 dBm

—txpattern

• Example

  --txpattern <0: all zeros;  1: all ones; 2: repeating 10; 3: PN7; 4: PN9; 5: PN15>

• Description

• Parameter

Index	Pattern
0	All zeros
1	All ones
2	Repeating 10
3	Sudo random 7 Repeat sudo Random string of size 7 (i.e 1527123 1527123
4	Sudo random 9
5	Sudo random 9

—ani

• Example

  --ani

• Description

  Enable ANI. The ANI is disabled if this option is not specified

• Parameter

  NO Parameter

—scrambleroff

• Example

  --scrambleroff

• Description

  Disable scrambler. The scrambler is enabled by default

• Parameter

  NO Parameter

—shortguard

• Example

  --shortguard

• Description

  Transmit with shortguard interval

• Parameter

  NO Parameter

—mode

• Example

  --mode

• Description

  Set the TX mode/bandwidth

• Parameter

  ht40plus/ht40minus/ht20/vht20/vht40plus/vht40minus/vht80_0/vht80_1/vht80_2/vht80_3

—rx

• Example

  --rx promis

• Description

  Receive TX99 packets

• Parameter

Index	Description
promis	Receive in promiscuous mode
report	Display tx99 packet info

---

All comand TX options

• —tx <frame/tx99/tx100/sine/off>
• —txfreq <Tx channel or freq(default 2412)> —txrate
• —txpwr <0-30dBm, 0.5 dBm resolution; sine: 0-60, PCDAC vaule> —tgtpwr
• —pcdac
• —gainIdx
• —dacGain
• —forcedGain
• —txantenna <1/2/0 (auto)>
• —txpktsz <pkt size, [32-1500](default 1500)>
• —txpattern <tx data pattern, 0: all zeros; 1: all ones; 2: repeating 10; 3: PN7; 4: PN9; 5: PN15
• —txchain (1:on chain 0, 2:on chain 1, 3:on both)
• —tpcm <forcedTgtPwr/forcedGainIdx/forcedGain/txpwr/tgtpwr> : Set transmit power control mode, by default tpcm is set to txpwr
• —ani (Enable ANI. The ANI is disabled if this option is not specified)
• —paprd (Enable PAPRD. The PAPRD is disabled if this option is not specified)
• —stbc (Enable STBC. STBC is disabled if this option is not specified)
• —ldpc (Enable LDPC. LDPC is disabled if this option is not specified)
• —scrambleroff (Disable scrambler. The scrambler is enabled by default)
• —aifsn <AIFS slots num,[0-252](Used only under ‘—tx frame’ mode)>
• —shortguard (use short guard)
• —mode <ht40plus/ht40minus/ht20/vht20/vht40plus/vht40minus/vht80_ 0/vht80_1/vht80_2/vht80_3>
• —bw <full/half/quarter>
• —setlongpreamble <1/0>
• —numpackets <number of packets to send 0-65535>
• —tx sine —txfreq <Tx channel or freq(default 2412)>
  • —agg
  • —bssid
  • —srcmac
  • —dstmac
• —tx sine —txfreq <Tx channel or freq(default 2412)>

---

All comand RX options

• —rx <promis/filter/report>
• —rxfreq <Rx channel or freq(default 2412)>
• —rxantenna <1/2/0 (auto)>
• —rxchain <1:chain 0, 2:chain 1, 3:both>
• —mode <ht40plus/ht40minus>
• —ack <Enable/Disable ACK, 0:disable; 1:enable, by default ACK is enabled>
• —bc <0:receive unicast frame, 1:receive broadcast frame (default)>
• —lpl <0:LPL off(default), 1:reduced receive, 2:reduced search>

---

All comand other options

• —pm <wakeup/sleep/deepsleep>
• —setmac <mac addr like 00:03:7f:be:ef:11>
  • —setbssid <mac addr like 00:03:7f:be:ef:11>
  • —SetAntSwitchTable (Set table1=0 and table2=0 will restore the default AntSwitchTable)
• —efusedump
  • —start
  • —end
• —efusewrite —start
  • —data (could be one or multiple data in quotation marks)
• —otpwrite
  • —data (could be one or multiple data in quotation marks)
• —otpdump
• —btmode